Dear ulrike,
this objectives are only available for the "old" Primostar cam.
If you connect such a microscope then you can find your mentioned objectives (see attachment).
With best regards
Maik
Search found 45 matches
- Tue Oct 26, 2021 8:35 pm
- Forum: Labscope Support (English)
- Topic: objectives not found
- Replies: 1
- Views: 762
- Fri Oct 15, 2021 2:34 pm
- Forum: Labscope Support (English)
- Topic: Labscope-iPad-Primostar beginner
- Replies: 2
- Views: 915
Re: Labscope-iPad-Primostar beginner
Dear David,
please see attached document.
Theoretically, 12 devices should be connected to a Primostar 3 via LAN connection.
Also pay attention to the bandwidth which is provided by the router.
This must be sufficient for the connected iPads.
With best regards
please see attached document.
Theoretically, 12 devices should be connected to a Primostar 3 via LAN connection.
Also pay attention to the bandwidth which is provided by the router.
This must be sufficient for the connected iPads.
With best regards
- Fri Oct 15, 2021 11:58 am
- Forum: Labscope Support (English)
- Topic: Labscope 'freezes' opening settings in Windows
- Replies: 8
- Views: 2025
Re: Labscope 'freezes' opening settings in Windows
Dear Catarina, sorry for the late reply. I am not aware of the behavior with the freezing Labscope software. At first I would suggest to install Labscope version 3.3 and check if the problem still existing. If the problem is not fixed then please tell us the installed OS version and your PC hardware...
- Tue Aug 17, 2021 2:26 pm
- Forum: Labscope Support (English)
- Topic: Labscope for Windows download link broken?
- Replies: 13
- Views: 8306
Re: Labscope for Windows download link broken?
Dear Christine, I can't reproduce the problem. Maybe the forwarding the ZEISS portal login page is blocked. As a workaround please login to the ZEISS portal first (https://portal.zeiss.com/).Then you can navigate to the Download Center and the Labscope software. Please can you send a screenshot of t...
- Thu Jul 29, 2021 8:59 am
- Forum: Labscope Support (English)
- Topic: axiocam 208 color in access point mode
- Replies: 1
- Views: 1465
Re: axiocam 208 color in access point mode
Dear Rob Schnittker,
it is possible to connect 2 iPads (see attachment).
With best regards
Maik Drabent
it is possible to connect 2 iPads (see attachment).
With best regards
Maik Drabent
- Wed Jul 28, 2021 4:59 pm
- Forum: Labscope Support (English)
- Topic: Ipads connected to axiom 208 color
- Replies: 3
- Views: 1108
Re: Ipads connected to axiom 208 color
Dear Rob Schnittker,
it depends on the router/access point which you have and what bandwidth they provide.
In a test with a powerful router, 51 iPad's could be connected at the same time.
What kind of access point do you have?
With best regards
Maik Drabent
it depends on the router/access point which you have and what bandwidth they provide.
In a test with a powerful router, 51 iPad's could be connected at the same time.
What kind of access point do you have?
With best regards
Maik Drabent
- Wed Jul 28, 2021 4:50 pm
- Forum: Labscope Support (English)
- Topic: Labscope for windows link brokern
- Replies: 3
- Views: 872
Re: Labscope for windows link brokern
Dear Affran Ardiyanto,
please can you post the link where you tried to download the Labscope software?
You should able to download it from the ZEISS portal. Therefor you have to register.
I have sent you a personal message with a download link.
With best regards
Maik Drabent
please can you post the link where you tried to download the Labscope software?
You should able to download it from the ZEISS portal. Therefor you have to register.
I have sent you a personal message with a download link.
With best regards
Maik Drabent
- Tue Jun 29, 2021 11:55 am
- Forum: Labscope Support (English)
- Topic: Labscope for Windows download link broken?
- Replies: 13
- Views: 8306
Re: Labscope for Windows download link broken?
Hello Vicky,
I tried the link and it works very well for me.
Does the problem still exist on your site?
Please can you post a screenshot of the error message?
With best regards
Maik
I tried the link and it works very well for me.
Does the problem still exist on your site?
Please can you post a screenshot of the error message?
With best regards
Maik
- Tue Jun 29, 2021 11:52 am
- Forum: Labscope Support (English)
- Topic: Wrong Scalings with Primostar 3 HD IP Cam
- Replies: 1
- Views: 818
Re: Wrong Scalings with Primostar 3 HD IP Cam
Hello Ben, thank you for reporting this issue. We have reproduced the problem of the incorrect scaling. It occurs for Labscope when connecting to a fixed Kohler Primostar 3 HD IP camera. The other types of Primostar 3 does not have this problem. It will be fixed with Labscope v3.3 which is coming en...
- Wed May 19, 2021 5:59 pm
- Forum: Labscope Support (English)
- Topic: News! Labscope v3.2 has been released, including new iPhone version
- Replies: 7
- Views: 9281
Re: News! Labscope v3.2 has been released, including new iPhone version
Dear Simon, Labscope 3.2 should be compatible with Windows 10 20H2 Please open the setting "Turn Windows features on or off" in the control panel and check if the check boxes are activated for "Media Features" and "Windows Media Player" (see attachment) If not please ac...