Other Zeiss Camara

Get help by our specialists and community members.
Post Reply
user-4047
Posts: 1
Joined: Thu Jan 01, 1970 1:00 am

Other Zeiss Camara

Post by user-4047 »

I have a ERc5s Ver 1.0 connected in Estereo Discovery V8 and my LapTop by port USB.
Can I use Matscope to connect this camara ?

I would like to connect Primotech and Discovery to Matscope Is it possible?
How can I do?
Thanks
user-3750
Posts: 137
Joined: Thu Jan 01, 1970 1:00 am

Post by user-3750 »

Hello,
Bazaldua wrote:I have a ERc5s Ver 1.0 connected in Estereo Discovery V8 and my LapTop by port USB.
Can I use Matscope to connect this camara ?

I would like to connect Primotech and Discovery to Matscope Is it possible?
How can I do?
Thanks
we are happy to hear that you like the Matscope software, and would like to use it with your Discovery V8. Unfortunately there is no network port on the original ERc 5s (version 1.0), and Matscope can only communicate via network with the camera / microscope.

You could buy an ERc 5s (Rev. 2) for your Discovery V8, and then access it with Labscope (but not with Matscope). Due to the current unavailability of a network adapter for any other microscope than the Primotech, the additional functionality of Matscope can only be used with the Primotech. To keep things simple, we therefore only released Labscope with support for the ERc 5s (Rev. 2) camera, in Matscope these cameras do not show up, and stereo microscopes cannot be configured at this point.

Could you please let us know which functionality of Matscope you would specifically like to use in conjunction with your stereo microscope? This will help us to improve our products in the future.

Thanks and best regards from the ZEISS support team.
Post Reply