Aperture allignment control

Post and discuss your API application solutions here.
Post Reply
Deepak Soman
Posts: 1
Joined: Mon Sep 06, 2021 6:24 am

Aperture allignment control

Post by Deepak Soman »

Hi,

I'm attempting to perform SACP measurements on our departments Gemini 300. What the way to control aperture and beamshit setting through zeiss API.

Deepak Soman
Trenba Junca
Posts: 1
Joined: Wed Jun 07, 2023 11:26 am

Re: Aperture allignment control

Post by Trenba Junca »

In particular, with his optical and contact measurement systems, Carl Zeiss has added 3D imaging (3D scanning) technology to the application spectrum of coordinate measurement technology allowing a real measurement system to be achieved. Performs both optical and contact measurements.
geometry dash scratch
Ibn E Adam
Posts: 1
Joined: Sat Sep 30, 2023 12:04 am

Re: Aperture allignment control

Post by Ibn E Adam »

To my understanding, the Zeiss API provides control over the aperture and beamshift settings for SACP measurements on the Gemini 300 electron microscope. Wayfair Coupons
Zou Ism
Posts: 1
Joined: Sun Oct 15, 2023 4:31 am

Re: Aperture allignment control

Post by Zou Ism »

You can control aperture and beamshift via the Zeiss API using commands like api.set_aperture(aperture_value) and api.set_beamshift(beamshift_value). Aperture values range from 0 (smallest) to 1 (largest), and beamshift from 0 (center) to 1 (edge). To retrieve current settings, use API.get_aperture() and api.get_beamshift(). Also, for potential savings, check Zeiss's website for coupon Codes or promotions that may aid your project.
Post Reply