Dear All,
After Zen ver 3.4 installation, the software can not recognize Primostar 3 integrated camera as active and "set exposure" and "Live" buttons modes are inactive.
We have try to install Labscope and than we could succeeded to get live view from primostar 3. Axiocam driver looks like installed in windows device manager but Zen software still would't recognize camera. Is there any advice to solution for this issue ?
Kind Regards,
Oezer
Primostar 3 Integrated Cam Driver Issue
-
- Posts: 180
- Joined: Wed May 20, 2020 10:10 am
Re: Primostar 3 Integrated Cam Driver Issue
Hello ozer baser,
please note that this is a forum for Open Application Development (OAD) and not for Zen or Microscope-System specific themes.
From the Primostar 3 team I got the following answer:
Primostar 3 integrated Camera can only run with Labscope, it cannot run in ZEN.
This is due to the original design of Primostar 3 integrated camera.
If customers need to run ZEN, they have to choose trinotube with external camera.
For further information please contact your local ZEISS sales team.
please note that this is a forum for Open Application Development (OAD) and not for Zen or Microscope-System specific themes.
From the Primostar 3 team I got the following answer:
Primostar 3 integrated Camera can only run with Labscope, it cannot run in ZEN.
This is due to the original design of Primostar 3 integrated camera.
If customers need to run ZEN, they have to choose trinotube with external camera.
For further information please contact your local ZEISS sales team.
-
- Posts: 2
- Joined: Mon Nov 15, 2021 12:39 pm
Re: Primostar 3 Integrated Cam Driver Issue
Hi,
First of all thank you very much for your reply and interest.
Also sorry for wrong question area...If it's necessary you can delete the topic.
Kind regards,
First of all thank you very much for your reply and interest.
Also sorry for wrong question area...If it's necessary you can delete the topic.
Kind regards,
-
- Posts: 1
- Joined: Tue May 23, 2023 5:47 am
Re: Primostar 3 Integrated Cam Driver Issue
Sometimes, a simple system reboot can help with connectivity or identity issues. Restart your computer and run the Zen software again to see if the camera is recognized.