Hi,
We use Zen Core ver 3.1
I have noticed that the feature parameter ellips gives strange values. I have tried both unscaled and scaled parameters and noticed that the unscaled ellips major is smaller than for example unscaled diameter/diameter filled. Could you please verify that the ellips values are correct?
Please note that in the Image Analysis Wizard the unscaled Feret Max/Min does not appear but they are available through OAD.
BR
Fredrik Olsson
Problems with feature parameter ellips
-
- Posts: 16
- Joined: Mon May 25, 2020 9:53 am
-
- Posts: 180
- Joined: Wed May 20, 2020 10:10 am
Re: Problems with feature parameter ellips
Hello Fredrik Olsson,
Therefore, the correct value can be obtained by a factor of 2.
I will clarify if this is 'as designed' or a bug and give a response.
You are right! Expected are the major and minor axis but returned are the semi-axis.I have noticed that the feature parameter ellips gives strange values
Therefore, the correct value can be obtained by a factor of 2.
Feret Max/Min is a feature in the Analysis Wizard using Zen blue or OAD but it is not offered by the Analysis Wizard using Zen Core.Please note that in the Image Analysis Wizard the unscaled Feret Max/Min does not appear
I will clarify if this is 'as designed' or a bug and give a response.
-
- Posts: 180
- Joined: Wed May 20, 2020 10:10 am
Re: Problems with feature parameter ellips
This is a bug that will be fixed.Please note that in the Image Analysis Wizard the unscaled Feret Max/Min does not appear
If you need this feature in Zen Core 3.1 please open a 'ticket'. To do so report the bug to your ZEISS sales team or to the local ZEISS 'Service and Support' team.
Thank you for your contribution!
P.S.: Unscaled Feret Max/Min is missing in "Feature Setup" but not in "Region Filter".